433MHZ Remote Control Garage Door Four Key Color Small Volume Copy Wireless Remote Control Thumb Garage Door Copy Remote Control
Multifunctional, multivariable, personalized and easy-to-use design.
This smart remote control duplicator is suitable for electric door remote control, retractable door remote control, garage door remote control.
Working current: 88mA
Modulation method: order (AM)
Transmitting power: ≤100mW
Suitable for: garage by opener remote control, gate by opener remote control, remote control alarm, etc.
Nominal voltage: 12V 27A battery (included)
Wireless transmission distance: 50-150m (open space)
The first clear code:
After the compensation code, copy the failed key again without copying the remaining buttons;
Then clear the code again;
Recovery code; at this time, the new code will overwrite the original key that was not successfully copied, and will now retain the original key that was successfully copied. If there is no copy after the second key copy, please repeat the above steps again and again until all keys are successfully copied.
1. Prerequisites for selecting the remote control: the original remote control function is normal, the remote control chip is the same or compatible, and the operating frequency of the remote control is the same.
2. The remote control can only copy fixed codes, learning code chips and some single-chip remote controls (for copying chip models, please refer to the copyable chip types).
3. Two-way remote control, rolling code remote control, remote control MCU encryption program cannot be copied. For example, hcs200, hcs201, hcs300, hcs301, etc.
4. Before copying the remote control, please make sure that the code on the remote control has been cancelled, and confirm that the code has been cancelled successfully. Otherwise, it will not be able to copy.
5. Make sure your remote has enough power, the distance between the two remotes is better! If the copy distance is too close, the switch will copy at a different angle. Press and hold the button on the original remote control to make the signal completely normal, then press the button on the remote control to make sure that the function is fully copied
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual color of the item because of different photographing light, angle and display monitor.